Liner for 20' container:
The rear end = gable end with door.
Before installation of the liner, make sure of the following:
- The container is clean.
- Sweep the floor.
- The container is free from any sharp objects.
- The container is equipped with hooks along the sides.
- The container is equipped with lashing point in the rear corner post.
lashing
point in the rear corner posCheck you have the following items:
- Five to six steel bars
- Four to five are used at bulk head for retention
- One is used to fasten the liner in front
- String
- Two fixation straps
- Two rear lashing hooks
- Two front lashing hooks
Make sure the liner is firmly attached with edges positioned parrallel to the container walls
Inflate the liner with air or shake the liner up and down repeatedly to facilitate easy installation.
PE
Hook
For retention of the liner during loading, transport and unloading, four steel bars are placed in the container door opening.
The liner is equipped with a sleeve, located just below the loading tube. Insert the upper steel bar in the sleeve, and fixate both ends in the loops of the fixation straps.
The remaining three steel bars are fixated in the loops below.
To insert the steel bars in the loops, it is recommended that one fixation strap is inside the container door opening, and the other strap is hanging outside the door opening.
When all steel bars are inserted in loops, it is easy to lift the fixation strap hanging outside the container door, and place it at proper place inside the container
